- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Train Control Systems (TCS) 1516 - WOW101-Steam - HO Scale
$107.67The WOW101 is a universal decoder for locomotives with DCC-ready 9-pin plugs, or locomotives which cannot accommodate a motherboard or WOWKit. This decoder may be hard-wired or plugged directly into any locomotive with a 9-pin JST plug. The WOW101 is... -
Train Control Systems (TCS) 1706 - UNIV-SH2-C Speaker Housing Kit - HO Scale
$17.72Universal speaker housing for the TCS 28mm round speaker (included). This simple, closed design channels both the front and rear audio out the front of the speaker housing. This housing should only be used in models with a closed upper shell, such as... -
Digitrax SDXH187MT - Series 7 Sound Decoder - 8 Selectable Sound Schemes Included - HO Scale
$53.048 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives 21MTC interface/21 PIN Motor 1.0 Amp/2 Amps Peak 8 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer -
NixTrainz 8 - Decoder Buddy Mini (2.2K) - HO Scale
$12.75The Decoder Buddy Mini was developed to fit into smaller steam and diesel applications. There has also been interest in HOn3 and S-Gauge applications. -
Digitrax SDXH167D - Series 7 Sound Decoder Sound FXv3 (8 CV Selectable) - HO Scale
$48.148 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives Digitrax 9-Pin Harness Motor 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer 10-Pin... -
Digitrax SDH167D - Series 7 Sound Decoder Sound FXv3 (2 CV Selectable) - HO Scale
$39.982 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives Digitrax 9-Pin Harness Motor 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer 10-Pin... -
NixTrainz 7 - Decoder Buddy Light Test Board - HO Scale
$14.35With the abundance of lighting functions and wanting to see and check them before I placed the shell on the frame, I decided I needed a way to see what was happening! I went to work and prototyped a small connector board with LEDs so I could... -
NixTrainz 4 - Decoder Buddy V1 - 8 Outputs - HO Scale
$14.351k ohm resistors The Decoder Buddy was developed for the 8 output decoders. This mother board does not include the 21-Pin Decoder. This mother board requires soldering. This printed circuit board is NOT INTENDED FOR USE IN A DC SYSTEM. However, if... -
NixTrainz 2 - Decoder Buddy Mini - HO Scale
$12.921k ohm resistors The Decoder Buddy Mini was developed to fit into smaller steam and diesel applications. There has also been interest in HOn3 and S-Gauge applications. This mother board does not include the 21 Pin Decoder. This mother board... -
SoundTraxx 884607 - BLU-2200 - Tsunami2 Bluetooth Decoder Steam-2 - HO Scale
$138.68The Blunami BLU-2200The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use... -
Train Control Systems (TCS) 1479 - KAM4-LED Decoder (4 Functions) - HO Scale
$59.53This decoder is a M4 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is physically larger than a M-series decoder, but... -
Train Control Systems (TCS) 1343 - LL8 Decoder (8 Functions) Decoder does not include Pin 3 on 8-pin NMRA plug as not used on LL Proto 2000 - HO Scale
$48.10The LL8 is a 8-function direct-plug decoder designed specifically to meet the needs of LifeLike/Proto 2000 models. The LL8 can quickly be swapped for the existing DC board in your model, making the installation process fast and simple. The LL8 has a... -
ESU 59659 - LokPilot 5 DCC, 21MTC MKL - HO Scale
$30.55The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all characteristics, however, the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This lack of flexibility comes with a cheaper price. LokPilot... -
SoundTraxx 884814 - TSU-BH2 Tsunami 2 Sound Decoder, 2 Amp, Steam Locomotives HO Scale
$100.33A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best products right here in the USA, and our friendly customer... -
Digitrax PX112-10 - Power Xtender for 10 pin Sound Decoders - HO Scale
$26.32Keeps locos & sound running during power interruptions caused by dirty or bad track. Hold up time varies based on decoder load & track conditions. Use with Digitrax Series 6 Decoders with 10 pin sound harnesses such as SDH166D &... -
Digitrax DN163M0 - Plug N' Play Decoder for MicroTrains FT - N Scale
$31.29Features: Board replacement decoder for MicroTrains FT. Golden-White LEDs for added realism Decoder Lock equipped -
Digitrax DN163A1 - Plug N'Play DCC Decoder - N Scale
$31.29Features: Board replacement decoder for Atlas N-Scale SD60, SD60M, SD50 and others Golden-White Surface Mount LEDs for added realism Decoder Lock equipped Note: In January 2012, DN163A1 was changed from larger through hole LEDs for lighting... -
Digitrax DHWHPS - DHWHPS 9 pin to DCC medium plug short harness - HO Scale
$7.45Digitrax 9 pin to DCC medium plug short harness (1”) -
Bowser 691-1291 - Speaker Enclosure - Dual Sugar Cubes - HO Scale
$15.00This Bowser - Stewart Speaker Enclosure is just the thing for adding sound in your Bowser, Atlas, Fox Valley and other diesels. Speaker enclosure comes with two 11x15mm, 8 Ohm impedance, sugar cube speakers installed with wire and plug. The speaker... -